Please type complete and accurate the model ID specified by manufacturer No Serial numbers please. examples: 1998 American Standard / 2011 Strat Deluxe / Les Paul copy / etc.
Saddle Spread (Very Important):
It is very important you indicate the correct bridge because the website will allocate the pole spread for this pickup according to the bridge saddle spread you click. This will assure satisfactory alignment of the poles and strings, resulting in good string loudness balance.
Strat VINTAGE 6 point
Most other bridge
Right Handed
0.00 USD
Left Handed
0.00 USD
Pole Spread will be which suits the bridge Saddle Spread you selected.
Pole Spread will be which suits the bridge Saddle Spread you selected.
NOTE: If you want to use your original Dog-Ear cover and it’s got a different pole spread (50mm) from that indicated above (47.5mm) just tell us in the ADDITIONAL NOTES Box on the shipping page -or- send a Contact message after you submit your order.
Modern soapbar Gibson's have a magnetic mounting plate on the floor of the pickup cavities. This must be replaced with our non-magnetic plate in order not to comprise beyond excellent hum cancelling of our P-90 Hx. This kit included everything you need and is easily swapped. Should your Gibson not have a mounting plate then do not include this kit, so if you are not certain please take a peek under a pickup.
.New build guitars will also benefit with this plate since it provides an easy and accurate way to position mounting screws for Soapbar pickups, and provide smooth and easy height adjustment.
Are these pickups are for a Gibson ES175, Epiphone Casino or other hollow body f-hole guitar with Dog-Ear covers? These will need a Kinman Dog-Ear cover Mounting Bracket for each pickup
NOTE 1: Some Epiphones such as the Casino "Coupe" have a routed neck pickup cavity which does not require a bracket but the bridge still does, check the cavities before proceeding. Take the pickups out other brand guitars to see if a bracket is required for each pickup too.
NOTE 2: For other brands of f-hole guitars check the 'Install requirements' file to see if the Mounting Bracket will fit.
Kinman P-90 Hx Dog-Ear mounting bracket
Cream
Black
Nickel-Silver
Logo Option
Logo Option
Cream
Black
Nickel-Silver
Logo Option
Cream
Black
Nickel-Silver
Logo Option
Logo Option
Cream
Black
Nickel-Silver
Logo Option
Cream
White
Chrome
Black
Nickel-Silver
Transparent with Decorative Top-plate
Transparent with Gold Glitter Top Plate
Gold Foil
Transparent with Red Top Plate
Transparent with Gold Mesh Top Plate
Logo Option
White
Parchment
Black
Logo Option
Get the most out of your new pickups by providing them with optimum electrical environment so they achieve their full sonic potential with our Goodbye-Soldering Harness (DIY Plug-n-Play install kit) where pickups & higher quality controls & wiring are installed fast and easy without any soldering.
Please go to the TAB below and choose your Harness model.
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
3 conductor hook-up cable is necessary for Series switching and/or Phase reversing.
This kit is positive latching and will not come apart without force. It has short leads and is intended to connect a normal pickup hook-up cable to the original pickup cable after the original pickup has been cut from it. Details are in >Technical >Install Guides.
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
if in doubt choose the first option since it suits either shielding condition
3 conductor hook-up cable is necessary for Series switching and/or Phase reversing. +$15 upcharge
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker and P-90 Pickups is: 380mm or 15 inches
Choose Plug into a Kinman Harness if the pickups are to be used with an existing Kinman Goodbye Soldering Harness
Note: Older versions of Kinman Harness use solder connections, please check
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker and P-90 Pickups is: 380mm or 15 inches
Not all Gibson's have this connector, you need to check inside your guitar. see the image below
Molex 2 wire plug
Molex 5 wire plug
Sorry our Goodbye Soldering Harness for Stratocaster will not install into G&L brand guitars because the switch slot is in a different position compared to Fender.
93.00 USD
93.00 USD
119.00 USD
Please indicate what the Bridge pickup is: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Please indicate what the Bridge pickup are: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Strat pickups require 250k volume pot load.
Which positions are for Humbucker or P-90 that require 500k volume pot load.
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
129.00 USD
129.00 USD
129.00 USD
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
ADDITIONAL NOTES
Synergy is an interaction or cooperation giving rise to a whole that is greater than the simple sum of its parts. The term synergy comes from the Attic Greek word συνεργία synergia meaning working together.
An opus is a created work, usually musical in nature.
A common usage of opus is with the term magnum opus which refers to one's greatest work, musical or otherwise
https://www.vocabulary.com/dictionary/opus
this_content