Please type complete and accurate the model ID specified by manufacturer No Serial numbers please. examples: 1998 American Standard / 2011 Strat Deluxe / Les Paul copy / etc.
Saddle Spread (Very Important):
It is very important you indicate the correct bridge because the website will allocate the pole spread for this pickup according to the bridge saddle spread you click. This will assure satisfactory alignment of the poles and strings, resulting in good string loudness balance.
Strat VINTAGE 6 point
Most other bridge
Right Handed
0.00 USD
Left Handed
0.00 USD
The P90-Bucker and Twang-Bucker are not available with the 53mm pole spread required for the 56.4mm bridge saddle spread you indicated. Please choose another model. A PAF Astound is recommended as a good companion bridge pickup for a P90-Bucker in the neck -and- a PAF Plus is recommended as a companion bridge pickup for the Twang-Bucker in the neck.
Magnet Spread will be because the bridge you indicated on the first Tab before requires it.
Cover Options
240 Open Top Buffed Nickel-Silver
Buffed Nickel Silver Closed-Top
Black Closed Top
Top Plate Cover
Black
Black Textured
Pearl White
Cream
White Pearl
Red Pearl
Gold Pearl
Blue Pearl
Black Pearl
Tortoise Shell
Logo Option
Logo Option
Mounting Foot Option
Standard Foot
Rounded Foot
3 Screw Mount
Mounting Foot option with 2 screws for Ibanez etc: Measure the distance between the 2 screws center to center in Millimeters (mm) and type it into the box provided below. Up-charge applies - Check price on the right side.
Enter distance between screws in mm (centre to centre)
Get the most out of your new pickups by providing them with optimum electrical environment so they achieve their full sonic potential with our Goodbye-Soldering Harness (DIY Plug-n-Play install kit) where pickups & higher quality controls & wiring are installed fast and easy without any soldering.
Please go to the TAB below and choose your Harness model.
Kinman's f-hole Easy Install Kit.
Avoids removing and replacing the controls of the guitar which is an extremely difficult task and most people won't even think about doing it. Click >>> How to change pickups in an f-hole guitar.
Your pickup will have our Harness plug attached and the female Adapter Kit will be included with your order.
You cut the cable of the existing pickup and solder the Kinman socket to the cable. Your new Kinman pickup will have a matching plug
If you prefer to remove the controls and solder the pickup to them choose For Soldering into your guitar at the top.
This kit is positive latching and will not come apart without force. It has short leads and is intended to connect a normal pickup hook-up cable to the original pickup cable after the original pickup has been cut from it. Details are in >Technical >Install Guides.
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
if in doubt choose the first option since it suits either shielding condition
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker and P-90 Pickups is: 380mm or 15 inches
Do you intend to connect this pickup to a Kinman Goodbye-Soldering harness (K5, K7 or K9) for Stratocaster?
If so, does your Kinman Goodbye-Soldering harness for Stratocaster (K5, K7 or K9) require a change to a 500k control? (Humbuckers & P-90 Hx require a 500k volume control).
The pickup will have out special Plug attached which is suitable ONLY for a Kinman harness.
Note: Older versions of Kinman Harness use solder connections, please check
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker Pickups is: 470mm
Not all Gibson's have this connector, you need to check inside your guitar. see the image below
Molex 2 wire plug
Molex 5 wire plug
Sorry our Goodbye Soldering Harness for Stratocaster will not install into G&L brand guitars because the switch slot is in a different position compared to Fender.
93.00 USD
93.00 USD
119.00 USD
Please indicate what the Bridge pickup is: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Please indicate what the Bridge pickup are: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Strat pickups require 250k volume pot load.
Which positions are for Humbucker or P-90 that require 500k volume pot load.
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
129.00 USD
129.00 USD
129.00 USD
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
ADDITIONAL NOTES
Synergy is an interaction or cooperation giving rise to a whole that is greater than the simple sum of its parts. The term synergy comes from the Attic Greek word συνεργία synergia meaning working together.
An opus is a created work, usually musical in nature.
A common usage of opus is with the term magnum opus which refers to one's greatest work, musical or otherwise
https://www.vocabulary.com/dictionary/opus
this_content