Please type complete and accurate the model ID specified by manufacturer. No Serial numbers please. Examples: 1998 American Standard / 2011 Strat Deluxe / Les Paul copy / etc.
Saddle Spread (Very Important):
It is very important you indicate the correct bridge because the website will allocate the pole spread for this pickup according to the bridge saddle spread you click. This will assure satisfactory alignment of the poles and strings, resulting in good string loudness balance.
Strat VINTAGE 6 point
Most other bridge
Right Handed
0.00 USD
Left Handed
0.00 USD
Pole Spread will be which suits the bridge Saddle Spread you selected.
NOTE: If you want to use your original Dog-Ear cover and it’s got a different pole spread (50mm) from that indicated above (47.5mm) just tell us in the ADDITIONAL NOTES Box on the shipping page -or- send a Contact message after you submit your order.
Metal Dog-Ear covers are not available for 53mm pickup pole spread however plastic covers without holes that can be drilled to suit any pickup are available on eBay,,, Search "Dog-Ear covers no holes".
Our Push/Push ESSC Control can split the coils of one or two Kinman Humbuckers that have ESSC (Enhanced Split Single Coil). It can be configured as a right or left hand Tone or Volume control for itself or any other pickup (It's your choice at time of install).
IMPORTANT: To avoid TONE losses and the microphonic screech of ordinary closed top covers we highly recommend our unique 240 Open Top Covers.
Cover Type
240 Open-Top Buffed Nickel-Silver
Standard Open-Top Chrome
Standard Open-Top Gold
Chromed Closed-Top
Gold Closed-Top
Buffed Nickel Silver Closed-Top
Black Closed-Top
Top Plates
Black Gloss
Black Textured
Cream
White Pearl
Red Pearl
Gold Pearl
Blue Pearl
Black Pearl
Tortoise Shell
Logo Option
Pole Screws
Mounting Foot Option
Standard Foot
Rounded Foot
3 Screw Mount
Mounting Foot option with 2 screws for Ibanez etc: Measure the distance between the 2 screws center to center in Millimeters (mm) and type it into the box provided below. Up-charge applies - Check price on the right side.
Enter distance between screws in mm (centre to centre)
Please fill up this field first.
Get the most out of your new pickups by providing them with optimum electrical environment so they achieve their full sonic potential with our Goodbye-Soldering Harness (DIY Plug-n-Play install kit) where pickups & higher quality controls & wiring are installed fast and easy without any soldering.
To include a KHP-90 harness after this order is added to the CART click ADD ANOTHER PRODUCT and navigate to >Products > Harness >Gibson type ... and ADD TO CART as a separate item.
Please go to the TAB below and choose your Harness model.
Kinman's f-hole Easy Install Kit.
Avoids removing and replacing the controls of the guitar which is an extremely difficult task and most people won't even think about doing it. Click >>> How to change pickups in an f-hole guitar.
Your pickup will have our Harness plug attached and the female Adapter Kit will be included with your order.
You cut the cable of the existing pickup and solder the Kinman socket to the cable. Your new Kinman pickup will have a matching plug.
if you prefer to remove the controls and solder the pickup to them choose For Soldering into your guitar at the top.
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our P-90 Hx Pickups is: 355mm
The pickup will have our special Plug attached which is suitable ONLY for a Kinman harness. Note: Older versions of Kinman Harness use solder connections, please check
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker and P-90 Pickups is: 380mm or 15 inches
The pickup will have our special Plug attached which is suitable ONLY for a Kinman harness. Note: Older versions of Kinman Harness use solder connections, please check
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker Pickups is: 470mm
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
if in doubt choose the first option since it suits either shielding condition
Cables are long enough for Stock guitars. If you require longer cables send a follow-up 'CONTACT' message stating the length of cables you require.
Cable length of our Humbucker Pickups is 470mm
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
3 conductor hook-up cable is necessary for Series switching and/or Phase reversing.
This kit is positive latching and will not come apart without force. It has short leads and is intended to connect a normal pickup hook-up cable to the original pickup cable after the original pickup has been cut from it. Details are in >Technical >Install Guides.
Please indicate what the Bridge pickup is: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Please indicate what the Bridge pickup are: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Strat pickups require 250k volume pot load.
Which positions are for Humbucker or P-90 that require 500k volume pot load.
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
Metal Dog-Ear covers are not available for 54mm pickup pole spread however plastic covers without holes that can be drilled to suit any pickup are available on eBay,,, Search "Dog-Ear covers no holes"
To include a KHP-90 harness after this order is added to the CART please swap to a PC and log-in and navigate to the Harness section and click Gibson type harness and ADD TO CART. Or send a separate order from the PC site.
You indicated bridge saddle spread of greater than 54mm which requires pickup pole spread of 54mm for optimum string-over-magnet alignment. However Dog-Ear covers are not available in 54mm so here are your options ..
1. Check your bridge saddle spread and change your selection on the first tab if wrongly entered.
2. Try to buy Dog-Ear covers without holes and drill them to 53mm. Search Ebay and other vendors for undrilled covers.
3. Dog-Ear covers can not be included as the order stands however you can still proceed with the order.
The P90-Bucker and Twang-Bucker are not available with the 54mm pole spread required for the 56.4mm bridge saddle spread you indicated. Please choose another model. A PAF Astound is recommended as a good companion bridge pickup for a P90-Bucker in the neck -and- a PAF Plus is recommended as a companion bridge pickup for the Twang-Bucker in the neck.
The HumbuckerTron cover is not available with the 53mm pole spread required for the 56.4mm bridge you indicated, please choose another cover.
54mm Bridge option is currently not available. We are hoping for it to be available soon.
Info and options for Kinman Converge-3 splitting controls
Noiseless split single coil optionThis bridge spacing requires a conventional Humbucker cover because the Tron cover can not accomodate the required 53mm pole spread. Go on to choose your preferred cover.
This bridge spacing requires a conventional Humbucker cover because the Tron cover can not accomodate the required 53mm pole spread. Go on to choose your preferred cover.
Synergy is an interaction or cooperation giving rise to a whole that is greater than the simple sum of its parts. The term synergy comes from the Attic Greek word συνεργία synergia meaning working together.
An opus is a created work, usually musical in nature.
A common usage of opus is with the term magnum opus which refers to one's greatest work, musical or otherwise
https://www.vocabulary.com/dictionary/opus
this_content