Base price is $55 for a single Volume pot and Jack Socket. As more modules are included the price increases accordingly. See pictures of modules below.
Use this ORDER CHANNEL if you are buying a harness with or without pickups. Order your pickups first and then come back here to add the harness. Generally this will not increase the cost of shipping but sometimes might add $4.
Suitable for stock Les Pauls, LP Jnr, some Epiphones, wide body f-holes like Gibson ES175 etc, some PRS and Custom designs. Message us with your unique requirements and we will try to help you. Cheap knock-off brands often have differences that make install very difficult so best not to try.
Not suitable for thin body f-hole guitars such as Gibson 335 and Epiphone Casino etc or Gibson SG solid body (too thin) and Telecaster Thinlines.
NOTE: Ideally this ORDER CHANNEL requires connection to a printer to make a paper copy of the different types of switches and pots we offer.
NOTE: Not available for Left Hand, Right hand only.
Accepts non-Kinman pickups also. (Screw-Down connector block accepts bare wires of other brand pickups as well as Kinman Harness Plugs)
Screw-Down connector block
A FREE high quality screw driver to tighten the small screws is included with your harness
Soldering is eliminated 100% with this ingenious harness, regardless of brand of pickups. Screw-down connectors (not shown in illustrations below) make it suitable for Kinman as well as other brands of pickups (not Gibson with 5 wire plugs).
As with all Kinman Harness the volume pots have our famous treble by-pass filter fitted and the Tone pot has a slide switch to select Normal .022uF cap or our Hi-Definition cap.
Easy turning pots for easy finger rolling (violinning). If you find it too easy place a felt washer under the knob to stiffen the feel as desired.
Config No 13 of KHP-90 with humbucker Push/Push splitting switches on the Tone controls.
Config No 11 of KHP-90 for non-splitting pickups.
