Please type complete and accurate the model ID specified by manufacturer No Serial numbers please. examples: 1998 American Standard / 2011 Strat Deluxe / Les Paul copy / etc.
Right Handed
0.00 USD
Left Handed
8.50 USD
Gold Plated Magnets & Mounting Screws
Gold Plated
Non-Plated
Cover Options
White
Aged White
Black
Parchment
Cover Options
White
Aged White
Black
Parchment
Logo Option
Note: These Colors do not accurately represent the actual covers, however are close enough to make a decision on.
Normal Baseplate
+0.00 USD
Parallel Baseplate
+30.00 USD
Get the most out of your new pickups by providing them with optimum electrical environment so they achieve their full sonic potential with our Goodbye-Soldering DIY Plug-n-Play install kit where pickups & higher quality controls & wiring are installed without any soldering.
Loaded pickguard? Nope, our Goodbye Soldering Harness is a better solution because you can use your original pickguard or buy any pickguard of your choice with the right number of mounting screw holes and with the holes in the right place so you don't have to drill extra holes in your guitar (Yuk) ... and you can choose any color you deire. Simply swap the original wiring and controls with our completed and wired harness, Zero soldering required, guaranteed. Whats more is our harness sounds better too.
Please go to the TAB below and choose your Harness model.
Sorry our NoSoldering Harness will not install into a G&L brand guitar unless you get a special pickguard made with the switch slot in a slightly different position. Click here to download a K9 Footprint Template which will tell you how such a pickguard should be made. My links page lists several pickguard makers.
Please indicate what the Bridge pickup is: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Please indicate what the Bridge pickup are: Humbucker* or P-90 it will have 500k Volume pot load Strat pickups will have 250k Ohm Volume pot load.
NOTE: * Humbuckers can not be split to single coil with this harness.
Choose the K9-H instead.
Strat pickups require 250k volume pot load.
Which positions are for Humbucker or P-90 that require 500k volume pot load.
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
129.00 USD Click to see details of TK3
129.00 USD Click to see details of TK3/1
129.00 USD Click to see details of TK4
134.00 USD Click to see details of TK9
Is the harness for a rear rout install where the controls are mounted through the wood? Click to see image.
0.00 USD
18.00 USD ($6 each x 3 = $18)
Choose For Soldering into your guitar if the pickups are to be connected to stock guitar electrics other than a Kinman Goodbye Soldering Harness that uses miniature plugs.
if in doubt choose the first option since it suits either shielding condition
3 conductor hook-up cable plus grounded magnets are necessary for Series switching and/or Phase reversing. (in a set of 3 in a Kinman K9 harness it's for middle pickup only) +$15 upcharge.
Cables are long enough for Stock Strats. If you require longer cables state the lengths you require in the ADDITIONAL NOTES box on the Shipping page. Lengths stated below are from the middle of the pickup to the tip of the cable.
neck 250mm (9-3/4") long
middle 188mm (7-3/8") long
bridge 152mm (6") long
Choose Plug into a Kinman Harness if the pickups are to be used with an existing Kinman Goodbye Soldering Harness
Note: Older versions of Kinman Harness use solder connections, please check
3 conductor hook-up cable plus grounded magnets are necessary for Series switching and/or Phase reversing. (in a set of 3 it's for middle pickup only) +$15 upcharge.
The ground is a separate wire from the Plug and is not shown.
Cables are long enough for Stock Strats. If you require longer cables state the lengths you require in the ADDITIONAL NOTES box on the Shipping page. Lengths stated below are from the middle of the pickup to the tip of the cable.
neck 250mm (9-3/4") long
middle 188mm (7-3/8") long
bridge 152mm (6") long
ADDITIONAL NOTES
Synergy is an interaction or cooperation giving rise to a whole that is greater than the simple sum of its parts. The term synergy comes from the Attic Greek word συνεργία synergia meaning working together.
An opus is a created work, usually musical in nature.
A common usage of opus is with the term magnum opus which refers to one's greatest work, musical or otherwise
https://www.vocabulary.com/dictionary/opus
this_content